15 Up-And-Coming Defra Approved Back Boiler Stoves Bloggers You Need To Watch

· 6 min read
15 Up-And-Coming Defra Approved Back Boiler Stoves Bloggers You Need To Watch

Defra Approved Back Boiler Stoves

There are many things to consider when choosing the best stove for your home. From the alluring appeal of dual functionality to the practical aspects of installation, safety, and compliance.

Back boiler stoves approved by DEFRA are an excellent solution to these problems. This is because they provide the smallest amount of combustion air, which means very little smoke.

Clean Burn Technology

A defra-approved back boiler is a great option to get a stove that is clean burning and can provide heat to your home and provide hot water to your radiators. These stoves have an integrated steel boiler capable of heating central heating systems while the fire is burning inside the stove. This is an efficient method to utilize wood burners.

The majority of our defra-approved back boiler stoves come with a pre heated airwash system that helps keep the glass doors clear of ash and soot deposits. The secondary combustion system burns any particles that were not burned during the initial burning. This helps keep the flue gas clean, which leads to a more efficient burning process and lower fuel costs.

fireplacesandstove  of our stoves are even more efficient than this and have been independently tested to ensure they meet the new, stricter DEFRA emission standards to become Defra SE (Smoke Exempt) approved. The stoves do this by having an air vent at the top that stops you from closing it completely, which would cut off oxygen supply to the flame. This causes the fire to smoulder instead of burning cleanly and release more pollutants into the atmosphere.


The moisture content of the fuel can be a significant element in the amount of smoke that is emitted from the stove. We recommend that you only burn seasoned, dry wood with a moisture content of less than 20% to ensure your stove is burning as efficiently and as cleanly as possible. Most of our Defra approved stoves come with a built-in moisture sensor that adjusts the rate of combustion accordingly when using wet or damp wood.

Some manufacturers have even gone a step further to increase the efficiency of their stoves by incorporating an advanced secondary clean burn system, which is controlled by an chrome pull lever at the base of the stove. This lever opens and closes the vent which draws air over the fire, re-burning the initial smoke created during the initial combustion process. Our Defra SE approved ranges are now even more efficient. You can save money on your energy bills.

Easy to Clean

A defra-approved back boiler stove allows you to run your central heating and hot water from the same system. This can be accomplished by running a loop through the other tappings on the back boiler (there typically are two) to your hot water tank and then using thermosyphoning in order to get the heat into your home. This also means that your boiler will never run out of hot water because it is fed from the tank.

To ensure that your stove is operating at its peak performance, you should keep it clean regularly. To begin, ensure the stove is cold. Then, wipe down the main body and the doors of the stove with a clean, dry cloth. We recommend using a microfiber towel since they are less abrasive.

After cleaning the inside of your stove it is recommended to clean the glass. Glass cleaners are readily available in a variety of hardware stores and will help remove stubborn marks and stains. It is recommended to apply the glass cleaner only sparingly since too much of it can harm the glass's surface.

Over time the seals around the glass and doors of your stove may begin to weaken. It is important to replace the seals at least once a year to avoid gaps that let heat escape. This can be done using stove rope that is available in a majority of hardware stores.

If you own an Eco Design 2022-compliant back burner on a stove that is defra-approved the combustion process will be much more efficient than traditional wood burning stoves. The latest technologies have made it possible to reduce the amount of combustibles released into the air. The stoves that comply with the regulations are more eco sustainable and also more affordable to run.

Another thing to consider when using a back boiler stove is that it is always a bit more expensive than a typical multifuel stove because it produces more hot water than a typical multifuel stove. However, it is still a very economical way to heat your home, since you can power both your central heating and hot water through the same source.

Easy to Install

Boiler stoves are a stylish and efficient solution that can provide hot and warm water for your central heating system. Contrary to other multi-fuel stoves which must be connected to an existing gas boiler, a wood burner with a back boiler can be connected directly to the main hot water and central heating supply without the need for a secondary heating system.

Wood burning stoves with back boilers are an excellent choice for those who want to be eco-friendly. They also produce fewer emissions, as they burn logs or pellets, than gas or oil heating system which makes them a good choice for those who are concerned about global warming.

Installing a wood-burning stove that has an electric boiler is relatively simple. It's important to ensure the stove is installed correctly and is connected to your heating system. This is best done by a trained heating technician. They can help you make sure that your stove is correctly installed and connected to the right systems, as well as making sure that all safety features are installed.

Defra Approved stoves, or Defra Exempt Stoves, as they are often referred to, have passed the Department of Environment, Food and Rural Affairs (DEFRA) standards for smoke emission levels. They are able to be used in Smoke Control Areas and have been tested and modified to ensure that they have a clean and efficient combustion that is able to be utilized with wood and smokeless fuels.

DEFRA approved stoves like the Defra Exempt Dunsley Yorkshire or our best-selling Hi-Flame Aidan can provide a highly efficient combustion process with minimal harmful emissions. They have been tested to the new Eco Design regulations that limit the amount of particulate matter, CO2, NOx and organic gases a stove can produce in its normal operation.

Smoke Control Areas Suitable

Smoke Control Areas are in place in most UK cities and towns. Burning logs on old stoves or open fireplaces can result in a fine if the smoke is considered to be an issue. The good news is that Defra approved back boiler stoves are exempt from these restrictions if you select the correct equipment for your home.

The Defra exempted wood burners are engineered to utilize Clean Burn technology which ensures that any fuel burned is burnt efficiently with minimal smoke production. You can still enjoy a stunning fireplace if you live within an area that is smoke-free, however logs must be limited to mineral fuels that are smoke-free.

They meet Defra standards by having airtight chambers with precisely controlled airflow. They also have triple airflow systems, which ensure that combustion byproducts will be burned up before they reach the chimney. This reduces nuisance smoke and reduces soot accumulation that can block the flue and reduce gas efficiency.

It is crucial to buy a Defra-approved, Defra-certified stove from a reputable local retailer who can ensure the proper size stove is selected for your space to provide the most efficient heating performance and is installed correctly by a HETAS-registered installer. They can also assist you to choose the best type of chimney liner to ensure a safe installation, and also provide guidance on whether your home needs additional ventilation.

Modern DEFRA approved back boiler stoves are worlds from old open fires and traditional wood burners and you are guaranteed a minimum of 75% heat efficiency that will not only save you money, but also decrease your environmental impact. In addition to this Defra approved stoves can be employed in a smoke-controlled area and they will require a minimum 6mm stainless steel twin wall chimney liner, which is less expensive than the larger 12mm liners needed for Ecodesign stoves.

If you are unsure regarding whether your home is within a smoke-control zone, you can inquire with your local council. They can provide you with all the latest information. The majority of reputable stove makers have a Defra exempt section of their range so that you can easily recognize these appliances when you shop.